Non-Compete for Independent Contractors: 2026 Rules
A non-compete for independent contractors can be void under state law and double as proof of misclassification. See 2026 state rules and safer clauses.
Draft a Contractor AgreementCan you make an independent contractor sign a non-compete?
Yes, but only where state law allows it and only if the restriction is narrow. Minnesota bans contractor non-competes, Washington bans them from June 30, 2027, and Colorado voids them below a pay threshold. A broad restraint can also be used as evidence that the contractor is really an employee.
Our position: a contractor non-compete is a trade, not a free option. Every bit of enforceability you add is also a bit of control evidence you hand to a tax auditor, a labor agency, or the contractor's lawyer. Draft the narrowest restraint that protects one named interest, or skip it and use tools built for contractors.
Key takeaways
- Minnesota's non-compete ban expressly covers independent contractors (Minn. Stat. § 181.988), including an LLC you force the individual to form.
- Washington's 2026 contractor earnings threshold is $317,147.09, and ESHB 1155 voids contractor non-competes entirely from June 30, 2027.
- The FTC's 2024 Non-Compete Clause Rule is gone: a court set it aside, the FTC dropped its appeals, and the rule left the CFR on February 12, 2026.
- Courts in Idaho, Mississippi, and Indiana have counted a non-compete as evidence of employee status.
- Confidentiality, non-solicitation, non-circumvention, and IP assignment clauses protect most of what a contractor non-compete is meant to protect.
Why is a non-compete riskier for a contractor than for an employee?
A contractor is supposed to be in business for themselves. A clause that stops them from selling their services to the market cuts against that premise, and classification tests are built to find exactly that kind of control.
The U.S. Department of Labor announced a final rule on November 19, 2026 that uses an "economic reality" test with two core factors: the nature and degree of control over the work, and the worker's opportunity for profit or loss. The rule says the actual practices of the parties matter more than what a contract makes theoretically possible. It does not change Internal Revenue Code classification and does not preempt state law.
The IRS asks the same question through its common-law test: behavioral control, financial control, and the type of relationship. If you treat an employee as a contractor without a reasonable basis, you can be liable for employment taxes under Internal Revenue Code § 3509.
California is stricter. Under Cal. Labor Code § 2775, a worker is presumed to be an employee unless the hiring entity proves all three ABC prongs, including freedom from control "under the contract for the performance of the work and in fact" and an independently established business.
Courts have already used non-competes as evidence. According to Foley & Lardner's review of the cases:
- Idaho: State ex rel. Industrial Commission v. Sky Down Skydiving, LLC, 462 P.3d 92 (Idaho 2020), said a non-competition clause "is more indicative of the type of control an employer typically exercises over an employee," even though Idaho permits them for contractors.
- Mississippi: Handyman House Techs, LLC v. Mississippi Department of Employment Security, 337 So.3d 681 (Miss. Ct. App. 2022), counted a non-compete toward employee status.
- Indiana: Jackson v. Leader's Institute, LLC (S.D. Ind. 2015) weighed a non-compete when assessing how permanent the relationship was.
The practical bite is a double exposure. A contractor sued on a non-compete will often answer that they were an employee all along, and the same contract becomes the evidence. For more on the underlying tests, see our guide to contractor vs. employee status.
The rule of reason adds a second squeeze. A part-time contractor is expected to serve other clients, so a court is less likely to enforce a restraint that blocks the work they need to fill their calendar.
Did the FTC ban cover independent contractors, and is it still in force?
No, the FTC ban is not in force. The FTC's 2024 Non-Compete Clause Rule defined "worker" broadly enough to reach independent contractors, but it never took effect.
Ryan, LLC v. FTC (N.D. Tex. Aug. 20, 2024) set the rule aside. On September 5, 2025, the Commission voted 3-1 to dismiss its appeals in the Fifth and Eleventh Circuits and accept the vacatur. On February 12, 2026, the FTC removed 16 CFR part 910 from the Code of Federal Regulations.
Enforcement did not stop. The FTC now proceeds case by case under Section 5 of the FTC Act (15 U.S.C. § 45). In Gateway Services, it ordered a pet-cremation company to stop enforcing non-competes that covered nearly 1,800 employees. Our FTC non-compete rule update tracks what that means for employers.
Which states restrict non-competes for independent contractors?
Most of the action is in state law, and several states name contractors expressly. This table covers the states where the contractor angle changes the answer. Our state-by-state non-compete guide covers employee rules in all 50.
| State | Reaches contractors? | What the law does | Authority |
|---|---|---|---|
| California | Yes, applies to any contract that restrains a lawful trade | Voids the restraint regardless of where or when it was signed. Business-to-business restraints get a rule-of-reason test (Ixchel Pharma v. Biogen, 9 Cal.5th 1130 (2020)) | Cal. Bus. & Prof. Code §§ 16600, 16600.5 |
| Minnesota | Yes, expressly, including an LLC the hirer requires the individual to form | Voids any covenant not to compete in agreements from July 1, 2023. Non-solicits and NDAs fall outside the definition | Minn. Stat. § 181.988 |
| Washington (today) | Yes, with a higher threshold | Void unless contractor earnings exceed $317,147.09 (2026), plus disclosure and other conditions | Chapter 49.62 RCW |
| Washington (from June 30, 2027) | Yes | Voids all employee and contractor non-competes. Customer non-solicits (18 months max) and confidentiality survive. Statutory damages of $5,000 plus fees | ESHB 1155 (2026) |
| Colorado | Yes, applies to any "individual" earning compensation for labor | Void unless annualized compensation, including fees, is at least $130,014 (2026) and the covenant protects trade secrets. Separate signed notice required. $5,000 penalty per worker | C.R.S. § 8-2-113 |
| Virginia | Only low-wage contractors paid hourly below the state median hourly wage | Void. $10,000 civil penalty per violation | Va. Code § 40.1-28.7:8 |
| Florida | Yes, "individual contractor" earning over twice the county annual mean wage | Allows covered non-competes up to four years with a mandatory preliminary injunction. Others fall under the older reasonableness statute | Fla. Stat. §§ 542.43, 542.45, 542.335 |
| Texas | Treated like employees | Enforceable if ancillary to an otherwise enforceable agreement and reasonable in time, area, and scope | Tex. Bus. & Com. Code § 15.50(a) |
One detail trips people up: Colorado's statute counts the "fee amount" in compensation, so a contractor's invoices count toward the threshold.
Colorado courts have applied the statute to contractors since at least Colorado Supply Co. v. Stewart, 797 P.2d 1303 (Colo. App. 1990).
How does one non-compete play out in five states? (worked example)
Take Priya Raman, a freelance product designer. Harbor Analytics paid her $120,000 in 1099 income last year. Her contract has a 12-month, nationwide restriction on designing for any analytics software company.
| State where Priya works | Result | Why |
|---|---|---|
| Washington (2026) | Void | $120,000 is $197,147.09 below the $317,147.09 contractor threshold |
| Minnesota | Void | The ban covers contractors regardless of income, and a court may award Priya attorney fees |
| Colorado | Void | $120,000 is $10,014 below the $130,014 threshold, and the clause would also have to protect trade secrets |
| Texas | Tested for reasonableness | A nationwide, 12-month bar on a designer who serves several clients is a candidate for narrowing or refusal |
| Florida | Depends on county | Covered only if $120,000 is more than twice the county's annual mean wage. Otherwise the older § 542.335 test applies |
The same facts change the result in three of five states. And in every one of them, if Priya works 40 hours a week only for Harbor, using Harbor's tools and following Harbor's process, the non-compete becomes Harbor's weakest document. A defense lawyer would use it as Exhibit A for employee status.
What should you use instead of a contractor non-compete?
Match the clause to the interest you are protecting. Each option below is narrower than a non-compete and less likely to read as control.
| What you are protecting | Better tool | Why it works |
|---|---|---|
| Confidential data, pricing, source code | A confidentiality clause | Excluded from Minnesota's definition of a covenant not to compete (§ 181.988, subd. 1(a)) and preserved by Washington's 2026 law |
| Your client relationships | A non-solicitation clause limited to clients the contractor actually served | Washington allows it for 18 months. Colorado allows it at 60% of the threshold, if narrow |
| Contractor going around you to your client | A non-circumvention clause | Targets one behavior, not the contractor's livelihood |
| Work product | IP assignment or a work-made-for-hire clause in your contractor agreement | Gives you ownership without restricting future work |
| Conflicts during the engagement | In-term exclusivity limited to named competitors | Ends with the contract. Minnesota's definition covers only restrictions after termination |
| Loss of a critical specialist | A paid retainer or notice period | Compensation makes a restraint more defensible and less one-sided |
In-term exclusivity still counts as control evidence if it blocks the contractor from other clients. Limit it to specific conflicts, not an entire industry.
What does a fixed contractor non-compete look like?
Here is a mistake-and-fix pair using Priya's contract.
The wrong way
Contractor will not, for 24 months after termination, provide services to any business that competes with Company anywhere in the United States, and will devote full business time to Company during the Term.
This fails on three counts. It is nationwide and two years long. It describes "any business" instead of a named interest. And "full business time" reads like an employment term.
The corrected way
During the Term, Contractor will not provide product design services to Northgate Metrics or Lumen Data. For 12 months after the Term, Contractor will not knowingly solicit any Company client with whom Contractor worked in the 12 months before termination. Nothing in this agreement limits Contractor's right to serve other clients.
The fix names the competitors, limits the post-term obligation to clients Priya actually served, and states her freedom to take other work.
How do you draft a contractor restriction that holds up?
Follow these steps in order.
- Confirm classification first. Run the worker through the IRS, DOL, and any state test before adding restrictions. If the relationship looks like employment, a non-compete is the wrong fix.
- Check the contractor's state. Look up where the contractor lives and works, not just where you are based. Use the table above and our independent contractor agreement guide.
- Name one legitimate interest. Trade secrets, a specific client list, or a named competitor. "Protect our business" is not an interest.
- Cut the scope. Limit the services, the clients, and the time. Skip geography and use a client list instead.
- Pay for the restraint where it matters. A retainer or notice-period payment can support enforceability and shows the restriction is bought, not imposed.
- Add the required notices. Colorado requires a separate signed notice (C.R.S. § 8-2-113(4)). The Defend Trade Secrets Act (18 U.S.C. § 1833(b)) immunity notice applies to contractors and consultants too.
- Document real independence. Keep records showing the contractor sets their own hours, uses their own tools, and serves other clients. Under the DOL's 2026 rule, actual practice outranks contract wording.
You can generate a contractor agreement with confidentiality, IP, and non-solicit terms, then have a licensed attorney review any restriction before you rely on it.
What if the contractor lives in a different state?
The contractor's home state often controls, whatever your choice-of-law clause says. Minnesota voids contract terms that make a Minnesota worker litigate elsewhere or lose Minnesota's protections (§ 181.988, subd. 3). Colorado does the same for workers who primarily live and work there (C.R.S. § 8-2-113(6)). California says a void restraint is unenforceable regardless of where it was signed (Bus. & Prof. Code § 16600.5). Florida's CHOICE Act applies when the covered worker's primary place of work is in Florida, regardless of choice of law.
Common mistakes to avoid
- Copying an employee non-compete into a 1099 agreement. Employee forms assume control and full-time loyalty, which is the wrong signal for a contractor.
- Using a nationwide, multi-year restraint. Courts treat part-time contractors as people who need other clients, so overbroad clauses get narrowed or struck.
- Ignoring where the contractor lives. A Texas-law clause will not save you in Minnesota or Colorado.
- Requiring full-time exclusivity. An exclusivity term that blocks all other work is classic control evidence.
- Forcing a contractor to form an LLC to dodge a ban. Minnesota's statute counts that entity as a contractor.
- Relying on the contract label. Under the DOL, IRS, and California tests, actual practice beats the word "contractor."
Sources
- Minnesota Statutes § 181.988 (Covenants not to compete void): https://www.revisor.mn.gov/statutes/cite/181.988
- Washington Department of Labor & Industries, Non-Compete Agreements (2026 thresholds): https://www.lni.wa.gov/workers-rights/workplace-policies/non-compete-agreements
- Chapter 49.62 RCW, Noncompetition Covenants: https://app.leg.wa.gov/rcw/default.aspx?cite=49.62&full=true
- Wilson Sonsini, Washington State's Expansive New Non-Compete Ban (ESHB 1155): https://www.wsgr.com/en/insights/washington-states-expansive-new-non-compete-ban.html
- Colorado Revised Statutes § 8-2-113 (annotated): https://law.justia.com/codes/colorado/title-8/labor-i-department-of-labor-and-employment/labor-relations/article-2/part-1/section-8-2-113/
- Colorado Department of Labor and Employment, 2026 PAY CALC Order (highly compensated threshold): https://cdle.colorado.gov/sites/cdle/files/adopted_2026_pay_calc_order_7_ccr_1103-14_12.8.25.pdf
- Code of Virginia § 40.1-28.7:8: https://law.lis.virginia.gov/vacode/title40.1/chapter3/section40.1-28.7:8/
- Florida Statutes § 542.45 (CHOICE Act, covered noncompete agreements): https://www.flsenate.gov/Laws/Statutes/2025/0542.45
- Florida Chapter 2025-213 (CHOICE Act session law): https://laws.flrules.org/2025/213
- Texas Business and Commerce Code § 15.50: https://statutes.capitol.texas.gov/GetStatute.aspx?Code=BC&Value=15.50
- California Business and Professions Code § 16600: https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=16600&lawCode=BPC
- California Business and Professions Code § 16600.5: https://law.justia.com/codes/california/code-bpc/division-7/part-2/chapter-1/section-16600-5/
- Ixchel Pharma, LLC v. Biogen, Inc. (Cal. 2020): https://law.justia.com/cases/california/supreme-court/2020/s256927.html
- California Labor Code § 2775 (ABC test): https://law.justia.com/codes/california/code-lab/division-3/chapter-2/article-1-5/section-2775/
- U.S. Department of Labor, Final Rule on Employee or Independent Contractor Status (Nov. 19, 2026): https://www.dol.gov/agencies/whd/flsa/misclassification/2026rulemaking
- IRS, Independent contractor (self-employed) or employee?: https://www.irs.gov/businesses/small-businesses-self-employed/independent-contractor-self-employed-or-employee
- Foley & Lardner, What Companies Need to Consider Before Asking an Independent Contractor to Sign a Noncompete Agreement: https://www.foley.com/insights/publications/2024/12/companies-consider-independent-contractor-noncompete-agreement/
- FTC, Federal Trade Commission Files to Accede to Vacatur of Non-Compete Clause Rule (Sept. 5, 2025): https://www.ftc.gov/news-events/news/press-releases/2025/09/federal-trade-commission-files-accede-vacatur-non-compete-clause-rule
- Federal Register, Removal of the Non-Compete Rule (Feb. 12, 2026): https://www.federalregister.gov/documents/2026/02/12/2026-02866/revision-of-the-negative-option-rule-withdrawal-of-the-cars-rule-removal-of-the-non-compete-rule-to
- FTC, Gateway Services final order press release (Nov. 26, 2025): https://www.ftc.gov/news-events/news/press-releases/2025/11/ftc-approves-final-order-prohibiting-noncompete-enforcement-gateway-services
This article is general information, not legal advice. Laws vary by jurisdiction. Pactlio generates professional drafts for review — have a licensed attorney review anything important.
Frequently Asked Questions
Can an independent contractor be required to sign a non-compete?▾
In most states, yes, but not everywhere. Minnesota voids contractor non-competes, Washington will from June 30, 2027, and Colorado, Virginia, and California restrict them heavily. Where they are allowed, the restriction must be reasonable in time, area, and scope and protect a legitimate interest such as trade secrets or client relationships.
Is a non-compete for an independent contractor enforceable?▾
It depends on the state and the wording. Courts in Texas apply the same reasonableness test they use for employees, while Minnesota voids the clause outright. Even in friendly states, a restraint that blocks a part-time contractor from earning a living elsewhere is the type courts narrow or refuse to enforce.
Does a non-compete make an independent contractor an employee?▾
Not automatically, but it counts against you. Classification tests look at real control, and courts in Idaho, Mississippi, and Indiana have treated a non-compete as evidence of employee-style control. One clause rarely decides a case, but a broad restraint combined with full-time hours and company direction can tip it.
Does the FTC non-compete ban apply to independent contractors?▾
No. The FTC's 2024 Non-Compete Clause Rule would have covered independent contractors, but a Texas federal court set it aside in August 2024, the FTC dropped its appeals in September 2025, and the rule was removed from the Code of Federal Regulations on February 12, 2026. The FTC still challenges individual non-competes case by case.
What can I use instead of a non-compete for a contractor?▾
Use a confidentiality clause, a client non-solicitation clause, a non-circumvention clause, and an IP assignment or work-made-for-hire clause. Each protects a specific interest without banning the contractor from working. In-term exclusivity limited to named competitors is another option, because it ends when the engagement does.
How long can a contractor non-compete last?▾
No single federal limit exists, so state law decides. Florida's CHOICE Act allows up to four years for high-earning covered contractors, while Washington caps customer non-solicits at 18 months and Texas requires a reasonable period. Restraints of six to twelve months tied to named competitors are the likeliest to survive review.
Does a contractor's LLC avoid a non-compete ban?▾
Not in Minnesota. Its statute treats a corporation or LLC as an independent contractor when the hiring company requires the individual to form it to get paid. Elsewhere, a genuine business-to-business contract may be judged differently, as in California under Ixchel Pharma v. Biogen, but a sham entity will not help.